The LT-300 Global Navigation Satellite System (GNSS)
receiver is a maritime navigation product from Lars Thrane A/S. The LT-300 GNSS
receiver is designed for the leisure as well as the professional maritime
markets. The LT-300 GNSS receiver meets all standards and certification
requirements needed for worldwide maritime navigation equipment.
Performance
The LT-300 GNSS receiver provides positions with an accuracy
better than 2 meters. The LT-300 GNSS receiver outputs navigation data (up to
10 Hz): UTC time and date, position, satellite information, ground speed,
course over ground and magnetic variation, to give your vessel smooth
navigation capabilities.
The 72-channel GNSS receiver benefits from advanced technologies
such as:
• Receive and track multiple
satellite systems (GPS, SBAS, GLONASS, and BeiDou)
• Support for Satellite-Based
Augmentation System (SBAS): EGNOS, WAAS, and MSAS
The LT-300 GNSS receiver is designed and built for the demanding and rough environment at sea and with an operational temperature range from -40⁰C to +55⁰C (-40⁰F to +131⁰F).
Features
• High-performance GNSS receiver
with hot start capability
• UTC time and date, position,
satellite information, ground speed, course over ground, magnetic variation
• 72-ch. GNSS
(GPS/GLONASS/BeiDou) satellite receiver with SBAS correction
• Simultaneous NMEA 0183 and NMEA
2000
• Configurable NMEA 0183
(enable/disable, talker ID, output rate)
• Configurable NMEA 2000
termination resistor (open or terminated)
• Easy configurable NMEA 0183
data rate (4800 or 38400 baud)
• Each unit is functional tested
prior to shipment
• Worldwide maritime
certification
Installation & Navigation
The LT-300 GNSS receiver is easy to mount on a 1” pole
(optional installation: roof-mount) with a single cable supporting NMEA 0183,
NMEA 2000, and power. The LT-300 GNSS receiver can be configured to either 4800
or 38400 baud (NMEA 0183), and open or short termination (NMEA 2000). Use the
LT-Service Tool for optional configuration of the LT-300 GNSS receiver. The
LT-Service Tool is a PC program, which may run on any Windows PC.
More than 40 years of experience have been put into the design and construction of the advanced LT-300 GNSS receiver, with an exceptional performance and specification level.
